|
The CO2 laser cutting glass, glass substrate thickness of the best .0012-0.0236 0 inches. If we do not use special methods, or, in some cases, do not use the unique method Laser is more difficult to thick soda lime (float) a cut glass. Apart from the conventional glass, the photo shows the color glass samples has been used in a sealed CO2 laser cutting opportunities. And the standard of float glass, colored glass cutting line can easily be broken through the notch and the method. Difficulties cutting irregular shapes. The traditional method is : along the edge of irregular shape, bored to 1.1 points, connected curve shape, Then the diamond grinding wheel, or the use of diamond saw blades, but these methods are time consuming and laborious. Cutting these opaque to translucent colored glass and the device includes a laser, XY beams through an optical system, a 2.5-inch lens is a half circle. Poly% of the spot size of 0.004 inches, the depth of focus of 0.07 inches. Color Glass adding metal or metal oxides, can not only produce color glass of sparkling color, but glass structure will be changed so that the laser energy and the local heat, will not make the glass substrates have unintended fragmentation. Said : cutting edge of design and metal cutting edge similar to that used laser cutting metal, used high-pressure auxiliary gas evaporation and melting of the materials from cutting regional swept away. Puzzles toy cutting, material width 2.25 inches high, 2.06 inches. Cutting power of 400 watts, cutting speed of 50 inches per minute (IPM). 50 IPM cutting speed, cutting the jigsaw puzzle of time required 7.5 seconds. During the cutting, using 60 PSI air as auxiliary gas. Cutting-in all the pollution under the ash is friable, it is easy to leave the clean laser cutting edge. |
User_Login 
User_Reg 
