Step enters the automatic work table assembly line to divide into following2parts
        

              1st,  feeding: Width0.4meter, length 6meters. Is composed by the below part: On the pressure rubber roller, gets down the power rubber stick, the alternating current machine and the decelerating device, the pressure and the altitude mixture control installment, the width and the lateral pressure adjusting device, two sides 导向槽, working platform, first time detent mechanism and electric appliance control box. May realize the different width and thickness adjustment. The alternating current machine position electromagnetic control, is equipped with step enters the length to assign, adjustment scope1-2meters, adjustment degree of fineness1millimeter. Is equipped with the start and tightly stops the button, is equipped with the onset and retreat control button,4LEDnumerical code tube demonstrated, demonstrated the length assigns with the work counts, has the long-distance switch station connection. Adds the feeding sensor, completes the first localization. The vacancy is away from the establishment.

              2nd, dust cover (customer basis working conditions choice): Gable feeding, prevented because the environment dust influencehits the sign machinenormal use, above all around is loaded with the good angle of view the observation window.

 Applicable scope: Buckles the board profession, the PVC tubing, the plastic tubing and so on.                

Parameter target:

1.               dozen signs ways: The customer from decides.

2.               dozen signs scopes:150*150millimeters

3.               dozen signs time:<3second

4.               step enters the speed: Each second 0.9 meter

5.               step enters the pointing accuracy:<1millimeter (non- attrition electromagnetism braking)

6.               work widths:50-350millimeters

7.               work pieces thickness:8-12millimeters

8.               进料台 lengths:6meters

9.         worklength: 1.5meters

10.            assembly lines altitudes:0.8meter (basis customer special details determination)

11.            power sources: Three phase a c 380V,50Hz,<750W

12.            material qualities: Aluminum alloy or iron

13.            上料 ways: Artificial

After 14.            power failures heavy localization function

            15. may adjust first time positioning device

16.            step enters is away from the adjustment scope:1-2meters, smallest regulating unit:1millimeter

17.            4LEDnumerical code tube demonstration that, The work counts with step enters is away from the establishment